ArlingtonROOFING PROS☎ (901) 499-4980

Collierville property guide

HOA & subdivision roofing in Collierville, TN.

Roof work in a Collierville subdivision has two tracks: the roof system itself and the private architectural review process that may apply to the property. Use this guide to organize the details before tear-off.

Approval and permit distinction

Town of Collierville building permits and Shelby County structural code compliance address public construction requirements. HOA or ARC approval is a separate private-covenant process; one does not replace the other.

Seven Collierville, TN starting points

Compare the roof details before you compare bids.

These are planning notes, not a substitute for current covenant documents or a roof inspection. Confirm the active ARC/HOA process before scheduling work.

Collierville, TN subdivision roofing summary
Subdivision / pocketBuild era / styleTypical pitchShingle standardARC turnaround
Schilling FarmsMaster-planned traditional / mixed corridors
Traditional and urban-scale residential
7/12–10/12Architectural dimensional shingles matched to approved color/profile14–21 days; confirm current ARC/HOA turnaround
Hunt Meadow / Hunt Meadow EstatesExecutive suburban estate traditional
Custom traditional
Varies; often steepArchitectural shingle or slate-profile match to the existing roof14–30 days; confirm current ARC turnaround
Collierville Town Square / Historic District BufferHistoric context / varied property ages
Historic-sensitive residential and mixed-use edge
Varies by property; confirm existing profileMatch existing visible material, profile, and approved colorConfirm applicable ARC, Town, and historic-context review path
Carriage HillsEstablished Shelby County suburban
Single-family suburban tracks
Varies by elevationStandard architectural dimensional profile14–21 days; confirm current ARC/HOA turnaround
Founders Park / Tara and similar master-planned pocketsMaster-planned suburban pockets
Steep hip and gable assemblies
Often steep; varies by elevationArchitectural shingles matched to the HOA exterior color board14–21 days; confirm current ARC/HOA turnaround
The Gatherings / Shelby Drive corridor adjacent subdivisionsLate 2000s / 2010s suburban construction
Modern suburban single-family
Varies by elevationArchitectural shingles with ridge-vent and drip-edge review14–21 days; confirm current ARC/HOA turnaround
Johnson Park / Byhalia Road corridor residential pocketsMature suburban residential pockets
Steep residential roof lines
Varies; often steepArchitectural shingles matched to existing profile14–21 days; confirm current ARC/HOA turnaround

Subdivision roofing notes

Schilling Farms

Back to jump bar ↑
Era: Master-planned traditional / mixed corridorsPitch: 7/12–10/12Risk profile: Wind-driven rain, hail, and complex roof-to-wall details

Common roofing quirks

  • Master-planned elevations can combine traditional roof forms with visible dormers, porches, and mixed corridors.
  • Steeper 7/12–10/12 planes move water quickly into valleys, wall flashing, and gutters.
  • Strict architectural design review makes manufacturer color and profile documentation important before material ordering.

Local compliance checklist

  • Photograph roof planes, valleys, dormers, visible flashing, and exterior transitions from safe ground-level positions.
  • Submit the manufacturer color/spec sheet to the ARC/HOA before tear-off and confirm the current submission format.
  • Separate Town of Collierville permit questions from private architectural approval.

ARC planning note

Standard architectural shingle match required; submit manufacturer color/spec sheet to ARC/HOA 14–21 days prior to tear-off. (Note: We manage ARC submittal paperwork for homeowners).

No unverified project counts or ARC outcome claims are published here. Start with a documented roof scope and the community's current rules.

Start a roof review →

Subdivision roofing notes

Hunt Meadow / Hunt Meadow Estates

Back to jump bar ↑
Era: Executive suburban estate traditionalPitch: Varies; often steepRisk profile: Steep-slope wind exposure, complex geometry, and color matching

Common roofing quirks

  • Executive rooflines may include steep hips, gables, dormers, and intersecting roof sections.
  • A partial repair can be highly visible when adjacent roof planes use different material generations.
  • Safe access planning matters on steep slopes and around custom flashing transitions.

Local compliance checklist

  • Document the existing manufacturer, product line, color, and profile when identifiable.
  • Include the manufacturer color/spec sheet with the ARC/HOA submission before setting tear-off.
  • Ask whether decking or structural findings would trigger Town permit review.

ARC planning note

Standard architectural shingle match required; submit manufacturer color/spec sheet to ARC/HOA 14–21 days prior to tear-off. (Note: We manage ARC submittal paperwork for homeowners).

No unverified project counts or ARC outcome claims are published here. Start with a documented roof scope and the community's current rules.

Start a roof review →

Subdivision roofing notes

Collierville Town Square / Historic District Buffer

Back to jump bar ↑
Era: Historic context / varied property agesPitch: Varies by property; confirm existing profileRisk profile: Historic context, setback awareness, aging details, and drainage

Common roofing quirks

  • Properties near the Town Square may need more careful attention to visible roof profile, pitch, and exterior context.
  • Older roof sections, additions, and legacy flashing can require separate documentation before replacement.
  • Setback, permit, and municipality approval questions should be clarified before exterior or structural changes.

Local compliance checklist

  • Confirm the applicable Town of Collierville permit and review path for the property address.
  • Document roof transitions, additions, drainage, and visible details that affect the surrounding historic context.
  • Do not treat a private HOA assumption as a substitute for municipal approval or code compliance.

ARC planning note

Standard architectural shingle match required; submit manufacturer color/spec sheet to ARC/HOA 14–21 days prior to tear-off. (Note: We manage ARC submittal paperwork for homeowners).

No unverified project counts or ARC outcome claims are published here. Start with a documented roof scope and the community's current rules.

Start a roof review →

Subdivision roofing notes

Carriage Hills

Back to jump bar ↑
Era: Established Shelby County suburbanPitch: Varies by elevationRisk profile: Wind, hail, aging materials, and prior remediation

Common roofing quirks

  • Homes from established build waves can have different shingle ages, ventilation details, and repair histories.
  • Prior wind-zone remediation may leave different material generations across one roof.
  • Roof-edge, flashing, and gutter review should distinguish storm effects from normal wear.

Local compliance checklist

  • Photograph prior repair or remediation areas and visible differences between roof planes.
  • Review ridge caps, starter courses, flashing, ventilation, gutters, and downspout discharge.
  • Confirm Town permit requirements and the current ARC/HOA process before tear-off.

ARC planning note

Standard architectural shingle match required; submit manufacturer color/spec sheet to ARC/HOA 14–21 days prior to tear-off. (Note: We manage ARC submittal paperwork for homeowners).

No unverified project counts or ARC outcome claims are published here. Start with a documented roof scope and the community's current rules.

Start a roof review →

Subdivision roofing notes

Founders Park / Tara and similar master-planned pockets

Back to jump bar ↑
Era: Master-planned suburban pocketsPitch: Often steep; varies by elevationRisk profile: Complex valley flashing, wind exposure, and color-board compliance

Common roofing quirks

  • Steep hip and gable assemblies can concentrate water and increase the number of valley and wall-flashing details.
  • Complex roof geometry makes a roof-plane map useful for both the scope and the ARC/HOA submission.
  • Exterior color-board requirements should be checked before choosing a replacement product or visible repair.

Local compliance checklist

  • Map hips, gables, valleys, roof-to-wall transitions, and visible flashing from safe positions.
  • Submit the proposed manufacturer color/spec sheet and confirm it aligns with the HOA exterior color board.
  • Separate structural or decking permit questions from private color and material approval.

ARC planning note

Standard architectural shingle match required; submit manufacturer color/spec sheet to ARC/HOA 14–21 days prior to tear-off. (Note: We manage ARC submittal paperwork for homeowners).

No unverified project counts or ARC outcome claims are published here. Start with a documented roof scope and the community's current rules.

Start a roof review →

Subdivision roofing notes

The Gatherings / Shelby Drive corridor adjacent subdivisions

Back to jump bar ↑
Era: Late 2000s / 2010s suburban constructionPitch: Varies by elevationRisk profile: Ventilation continuity, heavy rain, and roof-edge exposure

Common roofing quirks

  • Ridge-vent continuity and intake airflow should be reviewed as part of the complete roof system.
  • Drip-edge condition and roof-edge alignment affect how water leaves the roof during heavy rain.
  • Modern roof sections can concentrate runoff at valleys, walls, and lower roof intersections.

Local compliance checklist

  • Include ridge vent, intake, drip edge, flashing, and decking assumptions in the replacement scope.
  • Gather the manufacturer product, color, and warranty documentation before submission.
  • Confirm both Town permit requirements and private ARC/HOA documentation.

ARC planning note

Standard architectural shingle match required; submit manufacturer color/spec sheet to ARC/HOA 14–21 days prior to tear-off. (Note: We manage ARC submittal paperwork for homeowners).

No unverified project counts or ARC outcome claims are published here. Start with a documented roof scope and the community's current rules.

Start a roof review →

Subdivision roofing notes

Johnson Park / Byhalia Road corridor residential pockets

Back to jump bar ↑
Era: Mature suburban residential pocketsPitch: Varies; often steepRisk profile: Mature canopy debris, wind-driven rain, and steep access

Common roofing quirks

  • Mature canopy can load leaves and organic debris into valleys, gutters, and downspouts.
  • Steep residential roof lines can make roof-edge visibility, access, and flashing review more important.
  • Tree clearance and drainage should be considered alongside shingle condition.

Local compliance checklist

  • Photograph canopy clearance, roof edges, valleys, gutters, and downspouts from safe ground-level positions.
  • Review roof access and material staging needs before setting the work schedule.
  • Confirm the current ARC/HOA process and Town permit path for the property.

ARC planning note

Standard architectural shingle match required; submit manufacturer color/spec sheet to ARC/HOA 14–21 days prior to tear-off. (Note: We manage ARC submittal paperwork for homeowners).

No unverified project counts or ARC outcome claims are published here. Start with a documented roof scope and the community's current rules.

Start a roof review →

Before tear-off

Keep the two approval tracks visible.

Town of Collierville building permits and Shelby County structural code compliance address public construction requirements. HOA or ARC approval is a separate private-covenant process; one does not replace the other.

Tell us what your roof is doing.

Your details are sent securely to the roofing team so they can respond to this request.

Good questions

Before you reach out, know what happens next.

Does Town of Collierville approval replace HOA or ARC approval?

No. Town of Collierville building permits and Shelby County structural code compliance address public construction requirements. Private HOA or ARC approval addresses architectural covenants, so confirm both tracks when they apply.

When should a Collierville ARC or HOA submission be made?

Use the planning note on this page as a starting point: submit the manufacturer color and specification sheet to the ARC or HOA 14–21 days before tear-off, then confirm the community's current process and timing directly.

Can a roofing contractor handle Collierville HOA paperwork?

A roofing contractor can help organize the roof scope and manufacturer documents for a homeowner's submission. The homeowner or property owner remains responsible for confirming the community's current rules and approval.

What if a Collierville roof needs emergency protection before approval?

Make the property safe, document the visible condition, and ask about temporary protection. Emergency water-control work and permanent replacement approval are separate decisions.

Call Arlington Roofing Pros →